Doga flex 3
DOGA FLEX 3 is a cutting system for large ceramic gres porcelain and marble slabs. It allows linear and 45° cuts and angular profiling. It consists of a sliding carriage for housing an angle grinder with diamond blade to be used on one of guides available. Thanks to four ball bearing pulleys, DOGA FLEX 3 smoothly slides along the guides and it also has a swinging motion for adjusting the depth of the cut. Our system, is the only one with a millimetric adjustment device and two clamps allowing to reach the 45° position of the blade. DOGA FLEX 3 can house most of the angle grinders on the market and is also designed to connect a vacuum cleaner.
- FLEX 3 SS 60x41x26cm Ø115mm
It includes: cutting unit without grinder, disc Ø mm 115 and case.
- FLEX 3 CS 60x41x26cm Ø115mm
It includes: cutting unit with Bosch GWS 720W M14 grinder, disc Ø 115 mm and case.
- FLEX 3 SG 60x41x26cm Ø125mm
It includes: cutting unit without grinder, disc Ø mm 125 and case.
- FLEX 3 CG 60x41x26cm Ø125mm
It includes: cutting unit with Bosch 1300W M14 grinder, disc Ø mm 125 and case.
